Technical Guide
Customers can contact us at any time for any problems that may arise, and we will provide a complete, detailed technical guide.
- Before use:
Please check to ensure the product model, motor power, motor voltage rating, installation method, reduction ratio and the output shaft size meet your requirements. Contact your distributor immediately about any discrepancies.
- Using environment:
Do not use this gear motor in explosive environments, flammable gas environments, corrosive environments, or damp environments.
- In use:
It is possible to shut down the motor accompanied with a reduction or anomaly output torque if the power supply voltage fluctuates more than 10%.
- Installation:
When connecting the output shaft with the coupling, please make sure it’s fixed and the two shafts are parallel. The base shall be installed with bolts attached to the installation aperture to ensure that the speed reduction gear motor is tight.
- Matters needing attention:
Please select the standard frame number speed reduction gear motor. If selecting the mini speed reduction gear motor for special reasons, the load must be lower than normal.
1. Noise
Problem | Possible cause | Action |
Knocking | Gear surface hurt | Replace gear set |
Continually | Bearing broken | Replace bearing |
Periodically | Particle inside | Check gear |
Intermittently | Dirty lubricant | Replace lubricant |